Surge Voltage Protection - Surge Arrester Class I + II (B/C) 25kA (10/350)

  • PROTEC 25 kA (10/350), CLASS I + II (LPL I + II)

Arrester Class I + II (B/C) 25kA (10/350)

Surge voltage protection (PDF datasheet)Product enquiry and further information (Contact us form)

PROTEC 25 kA (10/350), CLASS I + II (LPL I + II)

  • The Schrack-Protec series has been developed to protect against partial direct and indirect discharges. It is intended to provide lightning protection level I and II (protection zone 0A to 1) according to IEC62305.
  • This series is tested for testclass I and testclass II according to IEC61643-1 with a maximum impulse current (Iimp)of 25kA (10/350) per pole and nominal discharge current (In) of 40kA (8/20) per pole. The devices are available for maximum continuous current operating voltage (Uc) of 275Vac.
  • Surge arrester class B/C, Class I/II, Type of design 1/2, meets EN/IEC-SN 60, part 4, and EN/IEC 61643.

INSTALLATION REQUIREMENTS

  • National regulations for installation must be followed!
  • In Austria: EN/IEC 8001-1, EN/IEC E 8049, EN/IEC 62305 or IEC 60364-5-53 A1.

RANGE OF APPLICATION

Varistor-lightning arresters/surge arresters designed for indoor mounting as a means of protecting consumer appliances against lightning and transient voltage surges. Can be used for construction systems with I and II classes of protection in accordance with EN/IEC E 8049 (EN/IEC 62305). The surge arrester operates in any position. The application of varistor technology extinguishes mains follow currents. It also ensures that connected devices are stress free and also offers a lower protection set off. No additional gas-filled blow-out spark gaps are required.

TECHNICAL DATA

  PTNC BC 275
(3+0)		 PTNS BC 275
(4+0)		 PTT BC 275
(3+1)
Standard IEC61643-1
Max. continuous voltage AC (DC) 275Vac (350Vdc)
Nominal discharge current (nI8/20) per pole 40kA 40kA 40kA (MOV)
100kA (GDT)
Max. discharge current (I max 8/20) per pole 100kA 100kA 100kA (MOV)
160kA (GDT)
Impulse current (Iimp 10/350) per pole 25kA 25kA 25kA (MOV)
100kA (GDT)
Specific energy per pole 156kJ/Ω 156kJ/Ω 156kJ/Ω(MOV)
2,5MJ/Ω(GDT)
Charge per pole 12,5As 12,5As 12,5As (MOV)
50As (GDT)
Protection level Up <1,4kV (at In)
<1,1kV (at Iimp)		 <1,4kV (at In)
<1,1kV (at Iimp)		 <1,4kV (at In) (MOV)
<1,1kV (at Iimp) (MOV)
Response time <25ns <25ns <25ns (MOV)
<100ns (GDT)
Follow current - - >100ARMS
Back-up fuse max. 250A gL/gG max. 250A gL/gG max. 250A gL/gG
Short-circuit withstand current 25kA / 50Hz 25kA / 50Hz 25kA / 50Hz
Protection Thermal protection Thermal protection Thermal protection
Terminal screw torque max. 4,5Nm max. 4,5Nm max. 4,5Nm
Temperature range -40°C - +80°C -40°C - +80°C -40°C - +80°C
Terminal cross section 35mm² (solid) / 35mm² (solid) / 35mm² (solid) /
  25mm² (stranded) 25mm² (stranded) 25mm² (stranded)
Degree of protection IP20 IP20 IP20
Housing material Thermoplastic;
ext. degree UL94 V-0		 Thermoplastic;
ext. degree UL94 V-0		 Thermoplastic;
ext. degree UL94 V-0
Dimensions DIN43880 3TE 4TE 5TE
Art.No. (without remote contact) IS211330 IS211340 IS211311

DESCRIPTION

  • LIGHTING PROTECTION LEVEL
  • SPD-CLASS
  • ORDER NO.

Protec PTNC BC 275

  • LPL I + II
  • Testclass I + II
  • IS211330

Protec PTNC BC 275 + H

  • LPL I + II
  • Testclass I + II
  • IS211331

Protec PTNS BC 275

  • LPL I + II
  • Testclass I + II
  • IS211340

Protec PTNS BC 275 + H

  • LPL I + II
  • Testclass I + II
  • IS211341

Protec PTT BC 275

  • LPL I + II
  • Testclass I + II
  • IS211311

CU-Busbar (SPD-FI) TNS (not useable for Protec TT system)

  • IS050019

CU-Busbar (SPD-FI) TNC

  • IS050020

Product enquiry and further information

We would be delighted to offer free application advice, technical information on products, free quotations and delivery information.

Name

Telephone

Product enquiry & further information

Clarian UK Ltd

Tel: 01942 620 062
Mob: 07367 200 200

Clarian UK Ltd: Specialists in industrial thermal management were we have many years experience offering well engineered competitively priced solutions.

Manufactures and supplies a large range of electrical and process control components. Including one of the largest ranges of industrial heating elements in the market.

Exclusive UK agent for Turk and Hillinger and Heatfor, two of the world's best known and highly respected manufacturers of industrial heating and silicone mat heating elements and braking resistors.

Clarian UK Ltd. Unit 12 Pagefield Industrial Estate, Miry Lane, Wigan, WN6 7LA. Company No. 05435493 England VAT No. 875743186 Tel. 01942 620 062
Contact Clarian About Clarian Privacy Policy
Copyright © All rights reserved. Reproduction in whole or part without written permission is strictly prohibited. While every effort is made to ensure the accuracy of the information provided, Clarian UK Ltd, Thermal Hire Ltd and its agents cannot accept responsibility for claims made. In Summer 2020 Thermal Hire acquired Clarian UK Ltd.
Web design and hosting by SG7 Media Solutions