Heating Cables, Crankcase Heater

Clarian uk ltd is the exclusive UK agent for Heatfor one of the worlds best known and highly respected manufacturers of heating cables.

We offer the widest range of constant power heating cables reels, mono exit cable and heating cable all available as standard or special types.

Call us on 01942 620 062 or use the contact form below & we’ll be happy to discuss your requirements.

On this page:

Heating Cable Highlights & Brochure

Clarian Heating Cable Highlights & Brochure (PDF datasheet)Product enquiry and further information (Contact us form)

Constant Power Cable

More about - Constant Power CableProduct enquiry and further information (Contact us form)

Constant power heating cable supplied on a real to desired voltage (12v to 230v), Wattage 10 to 60w per meter. Customer to cut and terminate. Wired in parallel so should a cable break occur the heater will continue to operate.

This particular kind of heating cable is suitable for all those applications where a constant power along the whole length, flexibility and high resistance at thermal excursions (-50°C +200°C) are required.

The production technology of this cable allows to manage different cutting lengths according to the steps of the contacts, normally placed at 50 cm one from the other.

The cable is formed by 2 insulated silicone cables alternative stripped at 50 cm. The resistive wire is wrapped around producing a parallel connection between the 2 cables. The external anti laceration silicone coating, guarantees flexibility, strength and high electric insulation.

The electric connection of the cable is made through the stripping of the external insulation, removing the resistive wire and the separation of the 2 cables.

This operation has to be done on both the extremity of the heating cable, paying attention to the end on the opposite side of connection, so to avoid any short circuit.

Applications include underfloor heating, roof heating and anti-condensation in refrigeration.

Monoexit Cable

More about - Monoexit CableProduct enquiry and further information (Contact us form)

Monoexit cable manufactured to customer specifications. Designed to operate to a maximum of 200°C. High power 60W per meter Max. Fully sealed against water-ingress therefore can operate in tanks, radiators and pipes.

This particular kind of heating cable has the start and exit wires on the same side, allowing its use when a connection of the two ends is not possible; furthermore, this particular construction reduces installation time, wiring costs and eventual replacement. The other side is sealed through a vulcanization that allows the cable to be immersed in water.

Insulation in PVC or silicone, with or without metal-braid, supplied with thermostat and, furthermore, their realizations can have specific diversified powers and not-heated sections along the length of the cable.

Applications include the heating of drip trays in refrigeration systems, ant freezing for air conditioning systems, aquariums, terrariums etc.

Heating Cable

More about - Heating CableProduct enquiry and further information (Contact us form)

Heating cable manufactured to customer specifications. Designed to operate to a maximum of 200°C. High power 60W per meter Max and designed to wrap externally around items to heat.

This particular kind of heating cable, extremely flexible and easily adaptable to complex shapes, can be used in many applications due to its versality. It could be supplied in reels or in a single piece with connections, connectors and wires.

This type of cable can have integrated cold parts, avoiding any joins and, even, cold and heating sections also at different powers, along its whole length.

It has been produced with resistive wire wound around a fiberglass core and according to the power and application could be insulated by PVC or Silicone material.

It is possible to produce PVC or silicone cables covered by metal braid and in Class I or Class II.

Applications include vending machines, industrial refrigeration, de-icing systems, catering equipment, industrial appliance and ant condensation, evaporation and windows.

Crankcase Heater

More about Crankcase Heater Product enquiry and further information (Contact us form)

This particular heater is largely applied in the refrigeration and conditioning sector, in particular, it has been designed for machines such as crankcases and compressors that need to heat the inner oil, so to guarantee, in this way, high efficiency and durability.

Crankcase heater is composed of the heating cable, in silicone insulation, assembled to a stainless steel closing clamp and protected by a tinner copper cover; it is supplied with PVC power cable for grounding (standard length 1m).

In addition to its small size, it is appreciated for an extremely easy installation and maintenance, furthermore, it can be realized according to the specific needs of the customer.