Floor Box

CIRCULAR FLOOR BOX FOR EITHER 13 AMP SOCKET OR RJ45 SOCKET

These circular floor boxes consist of an outer flange, which push fits into a circular aperture and top cover assembly, which is snapped into the flange.

The top cover assembly has a cover which rotates to uncover up to three access holes. This allows a variety of cable sizes to pass through the access holes promoting a clean and tidy visual appearance.

Floor Box

Product enquiry and further information (Contact us form)

The 1.5mm thick anodized aluminium plate is fixed in place by 2 x 4mm screws into the floor box assembly and depending on type selection can accommodate either rj45, BT or 13amp sockets (not included).

There are four knockouts (2 x 20mm and 2 x 25mm) for under floor cable entry, two on the bottom and two on the side.

The floor boxes are available in black or grey as standard but specials can be accommodated.

Technical Specification

Overall diameter of bezel

  • 140mm

Fixing hole size

  • 127mm

Flange depth below surface

  • 80mm

Bezel thickness above surface

  • 3mm

Inside diameter of flange

  • 111mm

Depth of connector box

  • 43mm

Max cable diameter

  • 18mm

Diameter of aluminium plate

  • 110mm

Material of box

  • ABS

Standard Plate Options

  • 4 X SHUTTERED RJ45/BT SOCKET
    • CR125FBGRP (GREY)
    • CR125FBBRP (BLACK)
  • 1 X 13AMP SOCKET
    • CR125FBGSP (GREY)
    • CR125FBBSP (BLACK)

Product enquiry and further information

We would be delighted to offer free application advice, technical information on products, free quotations and delivery information.

Name

Telephone

Product enquiry & further information