R1120 - Temperature Controller

R1120

Clarian R1120 (PDF datasheet). Product enquiry and further information (Contact us form).

The R1120 PID controller features a sophisticated control function. All essential settings are shown on the two 7-segment displays and are easily adjusted using the rotary switch. The 2-point or 3-point controller is also available as a variant with 3-point step control. Further feature. With an optional seal the housing front can achieve a protection class of IP54. Further characteristics: Self-optimising

Technical Data

Input Thermocouple:

  • Built-in internal compensation point and protection against sensor break and incorrect polarity.
  • Re-calibration not required for a line resistance of up to 50 ohm.
  • Calibration accuracy: < 0,25 %

Input RTD, Pt 100 (DIN):

  • 2- or 3-wire connection possible.
  • Built-in protection against sensor break and short circuit.
  • Max. permissible line resistance by 3-wire connection: 80 ohm
  • Sensor current: < 0,5 mA
  • Calibration accuracy: < 0,2 %

Linear error:

  • < 0,2 %

Influence of the ambient temperature:

  • < 0,01 % / K

OUT 1:

  • R1120-10?: Relay, (n/o contact) max. 250 V AC, max. 3 A (resistive load)
  • R1120-20?: bist. voltage signal, 0/18 V DC, max. 10 mA, short-circuit proof

OUT 2:

  • Relay, (n/o contact) max. 250 V AC, max. 3 A (resistive load)

OUT 3:

  • Relay, (n/o contact) max. 250 V AC, max. 3 A (resistive load)

7-Segment-Display:

  • Process: 10 mm red, Set: 10 mm red

Data protection:

  • EAROM

CE-mark:

  • EMC: 2004/108/EC, EN 61326-1 for industrial areas
  • EN 61010-1

Power supply:

  • Standard: 230 V AC, ± 10 %, 48...62 Hz

Connections:

  • Plug-in screw terminals, Protection mode IP 20 (DIN 40050), Insulation class C

Permissible operating conditions:

  • Operating temperature: 0...50 °C / 32...122 °F
  • Storage temperature: -30...70 °C / -22...158 °F
  • Climate class: KWF DIN 40040; equivalent to annual average max. 75 % rel. humidity, no condensation

Casing:

  • Format: 96 x 96 mm (DIN 43700), installation depth 67 mm
  • Panel cutout: 92 +0,5 mm x 92 +0,5 mm
  • Material: Noryl, self-extinguishing, non-drip, UL 94-V1
  • Protection mode: IP 20 (DIN 40050), IP 50 front side

Further feature:

  • With an optional seal the housing front can achieve a protection class of IP54.

Further characteristics:

  • Self-optimising

Weight:

  • app. 400 g

Subject to technical improvements.

Product enquiry and further information

We would be delighted to offer free application advice, technical information on products, free quotations and delivery information.

Name

Telephone

Product enquiry & further information

Clarian UK Ltd

Tel: 01942 620 062
Mob: 07367 200 200

Clarian UK Ltd: Specialists in industrial thermal management were we have many years experience offering well engineered competitively priced solutions.

Manufactures and supplies a large range of electrical and process control components. Including one of the largest ranges of industrial heating elements in the market.

Exclusive UK agent for Turk and Hillinger and Heatfor, two of the world's best known and highly respected manufacturers of industrial heating and silicone mat heating elements and braking resistors.

Clarian UK Ltd. Unit 12 Pagefield Industrial Estate, Miry Lane, Wigan, WN6 7LA. Company No. 05435493 England VAT No. 875743186 Tel. 01942 620 062
Contact Clarian About Clarian Privacy Policy
Copyright © All rights reserved. Reproduction in whole or part without written permission is strictly prohibited. While every effort is made to ensure the accuracy of the information provided, Clarian UK Ltd, Thermal Hire Ltd and its agents cannot accept responsibility for claims made. In Summer 2020 Thermal Hire acquired Clarian UK Ltd.
Web design and hosting by SG7 Media Solutions