- Home
- Thermal Management
- Heaters
- Aluminium Foil Heaters - IP68
- Cartridge Heaters
- Cast Heaters
- Ceramic Knuckle Heaters
- Coil Heaters, Coiled Heater Bands and Nozzle Heaters
- Custom Heaters
- Drum Heaters
- Finned Air Heaters
- Flanged Heaters
- Flat Tubular Heaters
- Flexible Tubular Heaters
- Heating Cables, Crankcase Heater
- Immersion Heaters
- Mica Insulated Heaters, Mica Band Heaters, Mica Plate Heaters
- PTC Self-regulating Heating Elements
- Silicone Mat Heaters, Wire Wound, Etched Foil
- Tape Heaters
- Thick Film Heating Elements
- Tubular Heaters
- Temperature sensors
- Temperature controllers
- Products
- Contact
RT7000 - Temperature Controller
Clarian RT7000 (PDF datasheet). Product enquiry and further information (Contact us form).
Uncompromising controllers: RT7000
The RT7000 is the top expansion level of the RT family. From 8 zones to 32 zones, this system can map as wide a range as a multi-zone controller. Two 32-zone controllers can then be expanded to 64-zones via cascading. Larger systems are implemented as customer-specific variants. Operation is via a 7-inch touch display or via our innovative App-based remote control unit.
Particular performance features:
- Particularly fast control with minimal overshoot and thus protection of particularly sensitive heaters, such as in the nozzles.
- Intuitive operation and rapid integration
- Remote control via APP and ELOVISON
Clearly illustrated control surfaces ensure intuitive operation. The user can choose between different display variants: Standard zone illustration, process illustration or graph/PID illustration.
In an emergency: Alarm
The heating process is automatically interrupted at temperature over/undershoot, power surge or sensor failure (sensor break). Rapid, unplanned temperature or energy increase, e.g., at a nozzle, can be an indicator of a leak. The system is switched off. To ensure that no data is lost, it is possible to set a back-up via USB storage.
Product variants:
- 8, 12, 16, 24, 32 zones
- From 1st half-year 2021: 40, and 48 zones and cascadable to 96 zones.
- Larger variants are available as custom solution
- Fuses can be accessed from the inside. In another upcoming product variant (1st half-year 2021) the fuses will also be available externally.
- Passive cooling.
Range of functions:
- PID-control operation with ELOTECH regulation algorithm
- VNC viewer function – the perfect remote-control unit
- Output ratio generation – from control operation (standard), manual operation, output ratio adoption from zone
- Self-optimising of PID parameters
- Soft start
- Temperature reduction "Lower"
- Boost function (temperature increase)
- Ramp function – define rising and falling ramp curves
- Current and performance value display per phase
- System heat sink monitoring
- Heater current monitoring
- Sensor error detection
- Graphical display including PID graph
- Grouping of zones
- Monitoring function
- Automatic sensor/load detection from 1st half-year 2021
- Loading of parameter sets via USB interface
- Tool menu – selection of pre-set recipes
- Process graph and PID graph for a precise overview of the work process
- User management – 3-levels of user management with respectively definable limitations
- Log book function – time-sorted illustration of messages, warnings and alarms
- Data storage via USB stick (graph, parameters, logbook)
- Thermocouple probe Type J, L, K, NEW: PT100 2-Leiter
- Output continuous operation, per 8-zone controller unit: Maximum total current: 30 A / 6,5 KW at 230V (30°C ambient temperature)
- At 40° ambient temperature: 4 KW per 8-zone unit
- Output single zone: Max. 14A
- Complete system: 400V three-phase current, max. 32/63A
Operation
- 7-inch touch display
- APP application for remote control unit or remote maintenance
Interfaces/protocols/technical data
- Harting plug (sensors and heater), variable selection
- Alarm signals / relay plug
- On/Off switch
- USB stick interface on the front panel
- Ethernet interface
- Option: Bus interfaces (RS-232, RS-485, TTY) with Modbus protocols
- From 1st half-year 2021: Profibus, Profinet and OPC UA
- Mains connection: 2.5m cable with CEE plug (selection of lengths)
- CE symbol
Housing
- Robust aluminium housing
- Variants: 8 and 16 zones, dimensions: approx. (HxWxD): H=200mm W=430mm D=300mm
- 24-32 zones: Dimensions: approx. (HxWxD): H=400 W=430mm D=300mm
- Elotech front laminate (customer-specific front laminate possible)
- Heat sink: side mounted, approx. 3 cm thick, l or 2 sides depending on mode.
Options / customer variants
- Front laminate with customer logo
- Customer logo appears at warm up
- Customer-specific plug configuration (sensor/load separately or together)
- Housing variant (coloured design strips: Blue, Orange, Green, Red, Dark grey)
- Customer-specific housing (individual customer design)
- Customer-specific design of user surfaces
- Different lengths of mains connection cable
Product enquiry and further information
We would be delighted to offer free application advice, technical information on products, free quotations and delivery information.