TYPE PMV (LIGHTLY COMPACTED)

Cartridge Heaters (PDF datasheet)Specials, product enquiry and further information (Contact us form)

Characteristics

The lightly compacted cartridge heaters of this series distinguish themselves by a higher immunity against mechanical shock, and by a substantially longer useful life as compared with noncompacted metal sheathed cartridge heaters of the same surface load. They are suitable for heating liquids, gaseous and solid media and resist arduous service conditions in industrial applications.

Technical Data

similar to the high performance cartridge heaters type HLP, however:

Maximum surface load: approx. 6,5 W/cm2 (on the sheath)
Tolerances: Diameter: +0,2 mm of the groundless covering.
Upon request these can be ground to finer tolerances -0,02 to 0,08 mm
Length: 1.5% at least, however 2 mm
Capacity: 10%

Please note

Cartridge heaters type PMV are only produced in stock types.

STOCK TYPE HEATERS

Diameter
- Length
- Power in W at 230 V
- Articel-No.

10 mm
- 100
- 125
- 120 421
10 mm
- 130
- 200
- 120 422
10 mm
- 160
- 250
- 120 423

12,5 mm
- 100
- 160
- 120 424
12,5 mm
- 130
- 220
- 120 425
12,5 mm
- 160
- 315
- 120 426
12,5 mm
- 200
- 400
- 120 427

16,0 mm
- 100
- 200
- 120 428
16,0 mm
- 130
- 280
- 120 429
16,0 mm
- 160
- 350
- 120 430
16,0 mm
- 200
- 450
- 120 431
16,0 mm
- 250
- 560
- 120 432
16,0 mm
- 300
- 800
- 120 433

20,0 mm
- 100
- 250
- 120 434
20,0 mm
- 130
- 400
- 120 435
20,0 mm
- 160
- 500
- 120 436
20,0 mm
- 200
- 630
- 120 437
20,0 mm
- 250
- 800
- 120 438
20,0 mm
- 300
- 1000
- 120 439

Installation guidance

The installation is easier than for the high performance heaters due to the lower surface load. Nevertheless please observe the installation instructions given for the HLP type heaters.

Recommended bore hole

Nominal diameter
- 10 mm
  - 10,2+ 0,1 mm
- 12,5 mm
  - 12,7+ 0,1 mm
- 16 mm
  - 16,2+ 0,1 mm
- 20 mm
  - 20,2+ 0,1 mm

Product enquiry and further information

We would be delighted to offer free application advice, technical information on products, free quotations and delivery information.

Clarian UK Ltd

Tel: 01942 620 062
Mob: 07367 200 200

Clarian UK Ltd: Specialists in industrial thermal management were we have many years experience offering well engineered competitively priced solutions.

Manufactures and supplies a large range of electrical and process control components. Including one of the largest ranges of industrial heating elements in the market.

Exclusive UK agent for Turk and Hillinger and Heatfor, two of the world's best known and highly respected manufacturers of industrial heating and silicone mat heating elements and braking resistors.

Clarian UK Ltd. Unit 12 Pagefield Industrial Estate, Miry Lane, Wigan, WN6 7LA. Company No. 05435493 England VAT No. 875743186 Tel. 01942 620 062
Contact Clarian About Clarian Privacy Policy
Copyright © All rights reserved. Reproduction in whole or part without written permission is strictly prohibited. While every effort is made to ensure the accuracy of the information provided, Clarian UK Ltd, Thermal Hire Ltd and its agents cannot accept responsibility for claims made. In Summer 2020 Thermal Hire acquired Clarian UK Ltd.
Web design and hosting by SG7 Media Solutions